High-speed rail External wash cleaning tools , high tech melamine foam brush
The splash soil on the ground will stain the high-speed rail. And the high-speed train needs to make no mistake at all, and the splashed soil not only affects the clean and tidy, it is very likely cause an error in a part or sensor and affect safety. Therefore, the railway department has to carry out cleaning and overhaul every 4,000 kilometers. So how are high-speed rails cleaned?
High-speed rail cleaning usually takes one to two hours, there are many cleaning staff member for interiors and outer. The high-speed rail has a special active cleaning room, just like the one that actively washes the car. After washing, there will be workers to manually clean important part to ensure clean. After washing and drying, the workers also use PH test paper to detect the body. The high-speed rail maintenance personnel must carry out fine inspections on the tens of thousands of parts of the whole vehicle. Only by ensuring the safety and reliability of the high-speed rail will the high-speed rail continue to be put into operation.
High-speed rail train outside cleaning
The high-speed rail will drive slowly to pass through automatic cleaning line. There is water specially prepared for the train on the cleaning line. Its pH and temperature are tailored for high-speed rail. The high-speed rail enters at a speed of no more than 3 kilometers, 6 sets of vertical brushes, 2 sets of diagonal brushes, and 6 sets of skirt brushes respectively clean the body, arc glass and apron. After professional cleaning, more than a dozen staff members dry it with a rag in order to better protect the train.
After the automatic cleaning, the roof and the arc are need cleaned again. The front of the two sections and the bogie are scrubbed again. The front should be cleaned four times. The washed body should be tested with pH test paper. After the train is cleaned, each person will swing the arm for more than 1600 times. It will continue until the next day at 7:00, and the last cleaned train will be sent to the repair workshop. For medical examinations, up to 16,000 parts of the vehicle will be carefully inspected by the mechanic to ensure safety and then sent back to work.
High-speed rail cleaning does not cause corrosion and damage to the train's outer casing, so it is especially important in the selection of tools and materials. Every time you clean the high-speed rail, you must check all the tools, including ladders, high-speed rail cleaners, water pipes, telescopic rods, and long handle brown brushes (high-tech foam brush). Rags, buckets, etc.
The ground dirt, dust and sewage are very easy to stick to the high-speed iron head, bogie and train arc. It is more laborious to clean and requires manual scrubbing by the staff to clean.
A new cleaning tool - high-tech foam brush, which is developed by lfsponge. It is made of high-density melamine foam combined with felt fabric by special process. It has strong cleaning power, no cleaning agent and convenient use. Using the micro-grinding technology of microfiber, deep into the inside of the micro-holes, quickly remove stubborn dirt, just clear water, is a new material for cleaning the exterior of High-speed rail.
●Micro-grinding technology: micro-fiber, no scratches, quick to stubborn dirt;
● Pure physical cleaning: only water, no detergent, suitable for bumpy surfaces.
● Fleece bonding: Reinforce the sponge and glue the Velcro tool.
High tech foam brush does not need to add cleaning agent. The water spray is directly wiped out. It can completely remove the dirt, dust and water stain on the surface of the high-speed rail. It is a new High-speed rail cleaning supplies of easy to use.
High tech foam brush is equipped with a raised cloth, which can be combined with various long-handled brushes to completely replace the traditional long-handled brown brush. It is a new type of motor cleaning product.
The technology foam brush has an incomparable advantage in the high-speed rail train cleaning. It requires only a small amount of cleaning water, has superior detergency, does not require any detergent, and reduces pollution of cleaning agent emissions. It can be said that it is energy-saving and environmentally friendly, and its magical decontamination effect is also washed more cleanly. With the further expansion of market demand,lfsponge will not only provide technology foam brushes, but also provide more high-quality compression technology foam products for more airlines in the future.
More details on www.lfsponge.com.